1.800.844.8683
  • Corporate Office & Manufacturing Plant

    800-844-8683
  • Northern Regional Office

    888-826-8683
  • Louisiana Office (Scott)

    337-456-9676
  • Louisiana Office (New Iberia)

    888-690-7098
  • Louisiana Office (Port Fourchon)

    985-396-4545
  • Brazil Office

    +55-22-2020-0255
  • Malaysia Office - Hoover Container SEA sdn Bhd

    +6-03-5524-2583
  • Malaysia Distribution Center

    +6-03-5524-2582/3
  • Australia Office

    1-800-040-099
  • West Coast Australia Office

    1-800-731-948
  • Middle East Office

    971-2-5553558
  • Norway Office

    +47-5171-5880
  • UK Office

    +44-1224-294657
  • Colorado Office

    720-230-9348
  • West Texas Office

    432-253-4449
  • South Africa Office

    +27 79 86 22 521
View All Locations
Request a Quote

Cargo Valve Tote Tank

Cargo Valve

Cargo Valve

The UN31A Cargo Valve Liquitote® IBC was designed to comply with the DOT’s Special Provision 12412. DOT - SP12412 IS commonly referred to as the pump-off special permit, which allows for the discharge of combustible and flammable liquids from an IBC while it is located on a transport vehicle. Under this special permit, only IBCs with bottom discharge systems that include emergency shut-off valves are permitted to discharge hazardous material from a trailer or flat bed. TheCargo Liquitote IBC is a one-piece 10-gauge (.135”/3.4 mm) stainless steel liquitote body with single-seam welding which provides greater strength due to a 50% less weld area, and an 8-gauge (.165”/4.2 mm) bottom.

The Cargo Valve Tote can hold, transport, and discharge hazardous and flammable materials while on the back of a trailer or flat bed. To comply with the special permit’s requirements that each emergency shut-off valve system must have three means of closure, the Hoover Cargo Valve Liquitote’s all 316 stainless steel cargo valve assembly includes the closure system noted in specifications.

For more information on Hoover's cargo valve tote, see our spec sheet.

Specs

Swipe left to view additional table data.

Units: USMetric
Nominal CapacityNominal LengthNominal WidthNominal HeightTare WeightGross WeightProduct Number
350 GALLONS 48" 42" 55.5" 635 LBS 6200 LBS 372050 (350 Valve on 42" side)
350 GALLONS 48" 42" 55.5" 635 LBS 6200 LBS 372102 (350 Valve on 48" side)
500 GALLONS 48" 42" 74" 800 LBS 8641 LBS 372545(500 Valve on 42" side)
500 GALLONS 48" 42" 74" 800 LBS 8641 LBS 372171 (500 Valve on 48" side)
  1219 mm 1066 mm 1010 mm 159 kg 2812 kg  
  1219 mm 1066 mm 1010 mm 159 kg 2812 kg  
  1219 mm 1066 mm 1880 mm 227 kg 3919 kg  
  1219 mm 1066 mm 1880 mm 227 kg 3919 kg  
Features
  • 10 gauge (.135"/3.4 mm), 304 Stainless Steel with 2B finish
  • 8 gauge (.165"/4.2 mm) sloped bottom
  • Stackable with sloped design center drain
  • Heavy-duty lifting lugs and leg positioners
  • 22" (55.8 cm) top opening/manway with fill port, EPDM gasket, Zinc-plated bolted clamp ring, formed neck
  • 3"(7.62 cm) Stainless steel pressure vacuum relief fill cap
  • 2" (5.08 cm) Top fill bung with EPDM gasket
  • Fork Lift Channels: 2-way fork channels with two fork bars welded to fork channels for 4-way lifting ability
  • Cargo Valve Assembly: Meets the three methods of closure requirement of DOT's SP 12412
  • UN Markings
Request Info








Purchase/Rent

Customer Information









Application Information