• Corporate Office & Manufacturing Plant

  • Northern Regional Office

  • Louisiana Office (Scott)

  • Louisiana Office (New Iberia)

  • Louisiana Office (Port Fourchon)

  • Brazil Office

  • Malaysia Office - Hoover Container SEA sdn Bhd

  • Malaysia Distribution Center

  • Australia Office

  • West Coast Australia Office

  • Middle East Office

  • Norway Office

  • UK Office

  • Colorado Office

  • West Texas Office

  • South Africa Office

    +27 79 86 22 521
View All Locations
Request a Quote

Acid Tanks

Acid Tanks

Acid Tanks Acid Tanks

Hoover provides a range of transportable horizontal and vertical acid tanksused for the safe transport and storage of a wide range of corrosive liquids, including chemicals for oil & gas and drilling processes, waste liquids and aviation fuel.

Additional linings for interior of the vessel are available to provide additional corrosion protection. The selection of the lining material is based on the acids stored in the tank. The external frame is constructed of carbon steel treated to provide corrosion resistance. Safety features include a relief valve and rupture disc on the tank container.

The acid tanks are designed and manufactured to meet DNV, EU Directive 1999/36/EC and EN 13530 standards. Frames meet DNV 27-1 standards.

UN31A DOT compliant polyethylene lined IBC

Hoover Container Solutions is offering a UN31A DOT compliant stainless steel IBC with a internal roto molded polyethylene lining. This design allows shippers and/or end users to transport their packaging groups II & III hazardous materials which normally are not compatible with an all metal IBC design type. The stainless steel outer shell is the same robust Hoover IBC design that has been proven and used in the chemical and petroleum industry for many decades. The inner shell is a linear low-density polyethylene (LLDP) material that is roto molded (125mil [3.2mm] approximate thickness) to the inside the IBC. All internal wetted surfaces of the IBC will have either a polyethylene or polypropylene material finish so no product stored inside of the container will come into contact with a metal finish.The stainless steel polyethylene lined IBC comes standard with a 16” diameter top manway opening featuring a stainless steel domed/bolt down polyethylene lined cover, and a 2” polypropylene bottom outlet ball valve.

View vertical offshore acid tanks specs.

View horizontal offshore acid tank specs.


Swipe left to view additional table data.

CapacityTarePayloadDimensions (L x W x H)
1,000 gal 5,071 lbs 12,567 lbs 6'7” × 6'7” × 8'5”
3,785 liters 2,300 kg 5,700 kg 1995mm × 1995mm × 2,571mm
HORIZONTAL ACID TANKS - PRODUCT SPECIFICATIONS                                    Units: USMetric
CapacityTarePayloadDimensions (L x W x H)
2,000 gallon 9,038 lbs 46,076 lbs 10' × 8' × 9'6'
7,600 liters 4,100 kg 20,900 kg 2,991 mm × 2,438 mm × 2,591 mm
  • Bottom Outlet/Sample Valve: 1 x 3” Bottom Outlet Assembly comprising of 3” Emergency Footvalve,  extension pipe, 2” Ball valve, 2” BSP spigot, drip cap and chain. 1 x 3/4” sample valve extends from bottom outlet extension pipe.
  • Safety Relief Valve: 1 x 2 1/2” FortVale Super Maxi Highflow pressure vacuum relief valve c/w vent button and flame gauze, Set pressure: 3.3 bar, Set vacuum:0.21 bar
  • Airline valve 1 and 2: 1 x 11/2 ” BSP , 1 x 3/4 ” airline ball valve with extension piped down left hand side of front of tank
  • Manlid: 1 x 460mm – 6-point fastening penine manlid with TIR provision. Dipstick: Calibrated and marked in 100 litre increments, housed in a stainless steel pipe.
  • Earthing Point: 1 off spade, welded to Skirt.
  • Document Box: 1 off, in 2” Stainless Tube (250mm Long), welded to frame upright on right hand side of bottom outlet end, c/w rubber cap and chain.
Request Info


Customer Information

Application Information